When you are going to focus on proper maintenance of your RV, you will definitely need to focus on the replacement of awning with time. As you know, you may need to face the issues of wear and tear of RV awning and it is important to replace it in a proper way during the maintenance. You do not have to worry about any kind of complex or time-consuming process for it because we are here to make it quite easy for you. You just need to read this article about the easiest procedure for the replacement of RV awning.

When it comes to getting the information on how to replace RV tablet, you will be able to do it with the steps given below for it:

Find out the replacement tablet for RV

Find out the replacement tablet for RV:

First of all, you will need to get the replacement tablet to use in your recreational vehicle. At the present time, you will be able to find it in any local retail shop for online store easily. It is very important that you are going to pick the right option according to the manufacturer and model of your recreational vehicle. When you are going to get it, it is essential to take the exact measurements of the current tablet inside your RV. However, you will need to get the design and appearance as per your choice to use in your vehicle.

Remove the old tablet:

In the next step, you will need to remove the old tablet from your vehicle. You will need to remove the bolts that are holding the top of tablet in the recreational vehicle. Usually, you will find for bolts – two on each tablet side. After that, you will need to remove two small screws that are available to prevent the fabric from the sliding in the track. Then you will need to take the tablet arms out of the brackets and you will need to extend it to the ground. After that, you will roll the tablet outside with the length of one photo from your RV.

In the next step, you will need to remove the roller tube from your RV. You just need to cover the upper side tablet brackets with the use of electrical tape or masking tape. After that, you will need to spread the end of the track with the use of flat blade screwdriver. You can pull the tablet tube gently out of the track.

Remove the tablet fabric

Remove the tablet fabric:

After completing these steps, you will need to remove the tablet Fabric in a proper wearing for the procedure of how to replace RV tablet. You will need to lock the rear spring of RV tablet. Then you will go to remove right arm from the right bracket of it. you will need to release spring tension of tablet and it is also important to mark the tablet control Lever location in a proper way. You will need to remove the old tablet Fabric in a proper way from the roller tube.

Attach the new tablet fabric:

In the last step, you will need to attaching the new tablet fabric in a proper way. You can spray silicone lubricant into the channels to make it easier. You will need to do it in a proper way and you will need to roll the new tablet fabric carefully on the roller tube. After that, it is important that you can install everything in the same way for efficient use inside your RV. If you are confused to take any kind of step for it, you should go for the online tutorials for it.

Author Profile

Cory Robertson
Cory Robertson
Tom Drury was born in Iowa in 1956. The recipient of a Guggenheim Fellowship, Drury has published short fiction and essays in The New Yorker, A Public Space, Ploughshares, Granta, The Mississippi Review, The New York Times Magazine, and Tricycle: The Buddhist Review. His novels have been translated into German, Spanish, and French. “Path Lights,” a story Drury published in The New Yorker, was made into a short film starring John Hawkes and Robin Weigert and directed by Zachary Sluser. The film debuted on David Lynch Foundation Television and played in film festivals around the world. In addition to Iowa, Drury has lived in Massachusetts, Connecticut, Florida, and California. He currently lives in Brooklyn and is published by Grove Press.